Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Arlington?
Panel replacement in Arlington typically costs $250 – $500 for a single section, including the panel and the labor to fit it. That range covers most standard residential doors, and it’s the estimate we give most often when one panel is dented, cracked, or bent out of line. Bottom sections cost toward the lower end because they’re the easiest to reach; top sections and specialty sizes run higher. The written estimate we provide after looking at your door sets the final price, and the estimate itself is free.
A garage door panel is not a universal part. It has to match the profile, color, and window pattern of the door you already have, or the repair shows from the street. That’s the single biggest reason two Arlington jobs that sound identical can land at different points in that range. The other reason is brand: we service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, and how quickly a matching Clopay or Amarr panel can be sourced affects the number more than the work itself does.
If your door is stuck, spring-broken, or jammed and you’re not sure what’s actually wrong, call us before you assume it’s a panel. Call (844) 524-5950. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and the estimate is free either way.
Panel Replacement Cost Breakdown (2026)
These are the typical estimated ranges for Arlington in 2026. They’re grouped by job type so you can match your situation to a number before you call.
| What you’re paying for | Typical estimated range |
|---|---|
| Single panel replacement (all-in) | $250 – $500 |
| Panel replacement (one of several sections) | $250 – $500 |
| Panel plus track realignment | $120 – $240 (track work, on top of the panel) |
| Panel plus roller replacement | $110 – $220 (roller work, on top of the panel) |
For context on how panel work compares to other repairs we handle in Arlington: spring repair runs $180 – $340 for a single spring, and a matched pair is usually replaced together, so a pair costs about twice that range. Cable repair is $130 – $250. Opener repair is $120 – $320, and opener installation is $250 – $550. Track realignment alone is $120 – $240, roller replacement is $110 – $220, and general garage door repair work lands between $150 – $600. A full new door installation, if the door is past saving, runs $700 – $2,200.
What pushes the number up or down
The lower end of that $250 – $500 estimate is usually a bottom panel on a standard door, in a stocked color or profile, replaced without touching the tracks or rollers. The higher end is a top panel, a windowed panel, a non-standard width, or a panel that comes out because the surrounding sections were also bent. If the door is out of alignment and the panel only failed because the panel was riding the track wrong, you’re paying for the panel and the correction, which is where the bundled numbers above come from.
The written estimate lays out both parts and labor as separate lines so you can see exactly where the money goes. That matters more on panel work than almost any other garage door job, because the panel itself is often the smaller half of the bill once a window insert or a non-standard size is involved.
What Affects Panel Replacement Pricing in Arlington
- Where the panel sits on the door. Bottom sections take the most abuse from cars, bikes, and weather, and they’re also the quickest to swap. Top sections are up on a ladder and take more time to line up, so they price higher on the same door.
- Brand and panel profile. A Clopay or Amarr panel has to match the door’s series, not just its color. We work the brand you already have across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, and how fast a matching section can be found sets the ceiling on the estimate more often than labor does.
- Windows and inserts. A windowed panel is a different part number from a solid one and costs more. If the window insert is intact, some doors let you replace the glass and keep the frame; others don’t, and the whole section has to go.
- Whether something else is bent. A dented panel is a panel job. A panel that’s dented and a door that’s out of balance usually isn’t, and finding out which you’re dealing with is the first thing we check on site.
- Housing stock and clearance. Arlington’s mix of older brick homes, townhouses, and newer infill construction means door openings and clearances vary a lot. A tight-ceiling or low-headroom setup takes longer to work in than a standard two-car opening.
- What kind of wallop caused it. A slow dent from a bicycle is a cosmetic annoyance. A door that’s been hit hard enough to bind in the tracks needs a panel plus an alignment correction, and that’s the job that lands near the top of the range.
Panels, openers, and springs are all we handle, which means the person looking at your dented section isn’t guessing whether the spring that goes with the repair is still healthy. If it isn’t, you hear about it before we touch the panel, not after. That’s the advantage of going with Arlington Garage Door Repair Experts rather than a handyman who’ll replace the panel and leave the underlying issue alone.
How to Save on Panel Replacement
The most reliable way to keep a panel job near the low end of $250 – $500 is to get it looked at before a small dent turns into a door that won’t close straight. A panel that’s binding the tracks is a panel plus an alignment correction, and the second part is what pushes the bill up. Address the panel while the rest of the door is still running clean.
- Get the exact match before you commit. We’ll confirm your door’s series, profile, and color from the door itself. A generic “close enough” panel is the most common way homeowners end up paying twice, because the mismatched section never looks right and eventually gets replaced again.
- Ask whether glass can be replaced separately. On doors where the window insert comes out independently, you can sometimes skip the full panel. On doors where it doesn’t, you can’t. It’s worth a direct question.
- Bundle only what actually needs doing. If a roller or a track is genuinely worn, doing it alongside the panel saves a second visit. If it isn’t, don’t let it onto the estimate. We’ll tell you which is which.
- Get more than one estimate. Panel work is priced per job, so two written estimates on the same door are easy to compare line by line. Free estimates make this a straightforward exercise rather than a cost of its own.
- Consider how far you are from replacement. On a single failed panel with a sound door and healthy springs, a panel swap is the right call. On a door with multiple bent sections, failing hardware, and an opener on the way out, we’ll say plainly when the numbers point toward a new door instead.
We keep the estimate free because the honest answer to “repair or replace” only comes from looking at the door. Call (844) 524-5950 and we’ll set up a time to look. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. For a closer look at how we handle single-section swaps and what gets included, see our panel replacement page.
Repair vs. replace: which way the money usually points
If one panel is damaged and the door structure, springs, and opener are healthy, repair wins comfortably. The panel job sits in that $250 – $500 band and the door keeps its original tracks and hardware, which are still matched to it. The math flips when two or three panels are bent, the tracks are out of line, the rollers are worn, and the opener is tired. At that point the individual repairs add up toward the $700 – $2,200 installation range, and a new door comes with everything matched from the factory.
There’s a middle answer people miss: a door that’s structurally fine but cosmetically tired. If the panels are sound and it’s the look you’re done with, a set of fresh sections can change the whole face of the door for far less than a new installation. That’s still panel work, and it still prices in the same band. We’ll tell you which of the three situations you’re actually in, and we won’t push the bigger job if the smaller one solves the problem.
Why we ask what brand your door is before we quote
Panel availability is brand-sensitive. Some profiles are simple to source and the estimate comes back clean. Others take more hunting, and a generic panel simply won’t fit the door frame or line up with the neighboring sections. Because we service eight major manufacturers, we can usually tell you on the first call whether your door’s sections are straightforward to match or whether the profile is unusual enough to slow things down.
Fast diagnosis, right parts, lasting fix. That’s the whole method. Your door is in specialist hands, and panel work from a specialist is a different job than panel work from someone splitting their week across ten trades.
FAQs – Panel Replacement Cost in Arlington
How much does a single garage door panel replacement cost in Arlington?
A single panel replacement in Arlington typically costs $250 – $500, panel and labor included. Bottom panels usually land at the low end of that range, and top panels, windowed panels, or non-standard sizes land higher. The written estimate after we see the door sets the final price, and it’s free. Call (844) 524-5950 for an exact quote.
Is it cheaper to replace one panel or the whole door in Arlington?
One panel is far cheaper. A panel job runs $250 – $500, while a full new door installation runs $700 – $2,200. Repairing the single section is the right call whenever the rest of the door is sound and the springs and opener are healthy. If multiple panels are bent and the hardware is worn, the total repair cost climbs toward the replacement range, and we’ll say so plainly rather than stack up repairs. Call (844) 524-5950 and we’ll give you the honest comparison for your door.
Can you replace just the glass or the window insert instead of the whole panel?
Sometimes, and it depends on the door. On doors where the window insert is designed to come out separately, replacing just the insert can save most of the $250 – $500 panel cost. On doors where the window is bonded into the section, the whole panel has to be replaced. We’ll check which type you have before quoting. Call (844) 524-5950 for a free look.
Why does panel replacement cost more on some Arlington doors than others?
Because the panel has to match. The $250 – $500 range shifts up when the door’s brand and profile are harder to source, when the panel is a top section rather than a bottom one, or when the dented panel is binding the track and needs an alignment correction alongside it. None of that is padding; it’s the parts and the time. Call (844) 524-5950 with your door’s brand and we’ll narrow the estimate before we arrive.
Can you fix a dented panel the same day in Arlington?
Often, yes. Many standard bottom-panel replacements can be handled same day when the panel is available, within the $250 – $500 typical range. Panels that need to be ordered take a second visit, and we’ll tell you which situation you’re in on the first call. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 524-5950 to set up an estimate.
Is panel replacement a DIY job?
No. A garage door panel looks like a flat sheet of metal, but it’s tensioned by the springs above it, and removing a section means working around a live torsion system. That’s the dangerous part of the door, and it’s not something to work on without training. Our technicians have up to 10 years of experience, and we handle torsion and extension spring work as a dedicated part of what we do. Leave the panel to a specialist and the rest of the door stays where it belongs. Call (844) 524-5950.
If you’re weighing a panel job against other repairs, our guides on garage door repair and garage door spring repair cover the ranges and what’s involved. Opener symptoms that look like door problems are worth checking too, which is where our garage door opener repair page helps. If the door won’t move at all, a snapped cable is often the cause, and garage door cable repair explains the cost and the fix. Doors that jump or scrape usually need track realignment, and stiff, noisy rollers are a separate job covered under roller replacement. When the door is beyond repair, new door installation sets out what a replacement involves and what it runs. If you’re sorting out which of these you’re facing, garage door maintenance walks through what a technician checks and how to tell a panel issue from a hardware issue. Homeowners nearby ask us the same questions, and the answers travel: see Alexandria, Falls Church, and McLean for the same pricing approach in those markets.
What happens when you call
You tell us what happened and what brand the door is. We ask a couple of questions to work out whether it’s a panel, a spring, a cable, or an opener, because the symptoms overlap more than people expect. If it’s a panel, we set a time to look at the door, confirm the match, and leave you with a written estimate before any work starts. The estimate is free and the price is set per job. Call (844) 524-5950. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Arlington market as of 2026. Arlington Garage Door Repair Experts offers free estimates – call (844) 524-5950.
What Our Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Tim Meyer"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Todd Sutton"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Matt Pruitt