Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Arlington Homeowners
When a garage door stops working, everything behind it stops with it. Cars get trapped inside, kids wait on the driveway, and the door hanging half-open leaves your house exposed. Arlington Garage Door Repair Experts handles that call every day: a snapped torsion spring, a door off its track, a panel pushed in by a backing car, or an opener that hums and refuses to lift. Our technicians have up to 10 years of experience, and garage doors are all we do. We work on the brand you already have, diagnose the actual failure, and carry the parts to finish the job in one visit. Call (844) 524-5950 and we’ll get a technician to your door, often the same day.
What Our Garage Door Repair Service Includes
Every repair starts with your door under load, because that’s how problems reveal themselves. We test the balance by hand, listen to the opener under strain, and look at the parts that carry the weight. Here’s what we handle most often in Arlington.
Panel Replacement
A damaged panel is usually a car bumper, a stray basketball, or a door that closed on something in its path. When a section is bent or holed, the door loses structural strength and the panels around it start to strain at the hinges. We source a matching section, align it with the existing stack, and set it so the door travels flat again instead of binding at the damaged section on every cycle.

Spring Repair
Springs carry the full weight of the door, and when one breaks you hear a bang and find a door that won’t lift more than a few inches. Torsion and extension springs both have a service life measured in cycles, not years, and both fail without a warning. We replace broken springs as a matched pair so the door stays balanced, and we set the tension correctly. This is the most dangerous repair in the trade; a wound torsion spring stores enormous force, and we never recommend handling one without training and the right winding bars.

Cable Repair
Cables run from the bottom corners up to the drums, and a frayed or snapped cable lets the door drop or hang crooked. You’ll notice a loose cable on one side, or a door that comes down at an angle and jams. We replace cables in pairs, inspect the drums and bottom brackets they attach to, and check the tension before the door goes back into service.

Track Realignment
A door that scrapes, shudders, or drifts sideways on the way up is usually riding on a bent track. Tracks get knocked by cars, ladders, and anything else that leans against them in a tight Arlington garage. We straighten the vertical and horizontal sections, re-anchor loose brackets to the framing, and confirm the rollers track true through the full travel of the door.
Roller Replacement
Rollers wear flat or seize, and a seized roller drags against the track until the door gets loud and the opener works harder than it should. If your door rumbles, squeals, or jumps as it moves, the rollers are the first thing to check. We swap out worn rollers, check the hinges and bearings while we’re in there, and quiet the door back down.
Sensor Calibration
The safety sensors at the bottom of the track tell the opener to reverse when something crosses the beam, and a misaligned or dirty sensor stops the door from closing at all. Blinking lights on the motor unit are the usual tell. We align the lenses, clear the beam path, test the reversal on contact, and confirm the opener’s force settings are where they should be.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
Garage doors and openers aren’t one system, and a repair goes better when the technician knows the specific hardware in front of them. We service LiftMaster openers and know where the drive gears and logic boards tend to wear on older units. Chamberlain openers share a lot of the same architecture, so the same diagnostic habits apply: check the safety beam first, then the travel limits, then the motor itself. Genie units have their own quirks with the chain drive and the wall console, and we’ve seen enough of them to skip the guesswork. On the door side, Clopay panels and sections vary by model line, and matching a replacement section means reading the door, not guessing from a photo.
Brand fluency matters less than diagnosis. A technician who only carries one manufacturer’s parts tends to “find” a problem those parts solve. We work on the brand you already have and start from the actual failure. Whether you have LiftMaster, Chamberlain, Genie, Clopay, or another make, we can help. If you have a spring or opener problem specifically, our garage door repair team handles those under the same roof, so the door, the opener, and the springs don’t need three different companies.
Signs You Need Garage Door Repair Right Now
Some garage door problems can wait a day. Others shouldn’t be left alone, because using the door makes them worse and can turn a small repair into a larger one.
- A loud bang from the garage and a door that won’t lift. That’s almost always a broken spring. The opener will strain and the door will move a few inches before stopping. Stop using the opener at that point, because running it against a broken spring burns out the motor too.
- A door that comes down crooked or hangs at an angle. A snapped cable or a broken spring on one side causes this. Call a technician before the door bends a track or drops the rest of the way.
- The door reverses or won’t close at all. Blinking lights near the motor usually mean the safety sensors are out of line or blocked. It’s an easy fix, but an unclosed door leaves your house open, so it’s worth handling quickly.
- Grinding, scraping, or a door that shudders on the way up. Worn rollers or a bent track cause this. Left alone, a misaligned door wears the opener out and can jump the track entirely.
- A visible gap, dent, or hole in a panel. A damaged panel weakens the whole door and lets water and pests in. Panel replacement is straightforward and keeps the door structurally sound.
Our Garage Door Repair Process – Step by Step
We keep the process predictable, because most homeowners calling about a garage door are already having a bad day. Here’s what a typical repair visit looks like.
- 1
Phone questions first. We ask what the door is doing and what it sounds like, so the technician arrives with a good idea of what’s wrong and the parts most likely needed. That saves a second visit on most jobs.
- 2
Full inspection under load. At your door, the technician disconnects the opener and tests the door by hand to check balance, then inspects the springs, cables, drums, rollers, hinges, and track. We also look at the opener’s force settings, travel limits, and safety reversal.
- 3
Straight answers and a written price. You get a clear explanation of what failed and what it takes to fix it, with the price quoted and agreed before any work starts. If something else is near the end of its life, we’ll show you rather than just mention it.
- 4
The repair itself. We replace the failed parts, set spring tension correctly, align the tracks, and lubricate the moving points. Springs and cables get replaced in pairs when they’re matched, so the door stays balanced.
- 5
Final test and a walkthrough. The door gets cycled several times, the safety reversal is checked, and the technician walks you through what was done and anything to keep an eye on. Questions get answered before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Arlington?
Most garage door repairs in Arlington run between $150 and $600, depending on which part failed and how much of the door needs work. A broken spring is the most common call, and a single spring typically runs $180 to $340; since springs are usually replaced as a matched pair, a pair costs about twice that. A snapped cable typically runs $130 to $250. Opener repairs sit around $120 to $320, and if the unit is past saving, opener installation runs $250 to $550. A bent or damaged panel usually costs $250 to $500 to replace. Track realignment runs $120 to $240, and worn rollers run $110 to $220. Larger jobs, like a full door that’s beyond repair, can reach $2,200 for a new installation.
What affects the price: the number of parts being replaced, the door size and weight, whether the springs are torsion or extension, and how much access the garage allows. A tight garage with a low ceiling takes longer than an open double bay, and that’s part of the estimate, not a surprise on the invoice.
To avoid overpaying, ask for the price in writing before work starts and make sure it covers parts, labor, and the final safety test. Our estimates are free, and the written estimate sets the final price. You’ll know the number before the technician picks up a tool. Call (844) 524-5950 for an exact quote.
Garage Door Repair Near Arlington – Our Service Area
We cover Arlington and the neighborhoods and towns around it, including Fort Hunt, Mount Vernon, Mason Neck, Seven Corners, Bailey’s Crossroads, Lake Barcroft, Falls Church, Alexandria, and West Falls Church. If you’re in Fort Hunt or Mount Vernon and your spring snapped this morning, our garage door repair team can be on the way the same day. For Mount Vernon and Mason Neck calls, our garage door repair coverage runs on the same schedule: fast dispatch from 7am to 7pm, Sunday through Friday. We answer the phone 24/7, so call whenever the door fails.
Serving Arlington, VA – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Arlington
Garage door repair is fixing the specific part that failed so the door works safely again. That covers springs, cables, rollers, tracks, panels, hinges, and the opener, all under one trade. Rather than installing a new door when something simple breaks, a repair restores the existing door. Our technicians have up to 10 years of experience and work on the brand you already have, from LiftMaster and Chamberlain openers to Clopay doors.
Most repairs finish in one visit, usually within a couple of hours. A single spring replacement is often under two hours, while a cable and spring job together can take a bit longer. Opener repairs can be quick, but opener replacement involves new wiring and travel-limit settings. The technician gives you a time estimate before starting, and if a part has to be ordered for a match, you’ll know that upfront rather than after the visit.
Typical garage door repairs in Arlington run from $150 to $600, depending on the part. Spring repair is $180 to $340 for one spring, cable repair is $130 to $250, and opener repair is $120 to $320. Panel replacement is $250 to $500, track realignment is $120 to $240, and roller replacement is $110 to $220. The written estimate sets the final price, and estimates are free. Call (844) 524-5950 for an exact quote.
Yes. We service LiftMaster and Chamberlain openers, along with Genie and doors from Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Brand familiarity means we know where each unit tends to wear out, so diagnosis is faster and parts are easier to match. We’re not a dealer pushing one make; we fix what’s already on your ceiling. Call (844) 524-5950 for a free estimate.
Yes, same-day service is available. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed on Saturday. For a same-day repair or a broken spring, call (844) 524-5950 early in the day.
Yes. The parts and labor on your repair are covered by our satisfaction guarantee, so if something isn’t right, we come back and make it right. The exact coverage depends on the parts used, and the technician confirms it before the work starts. Call (844) 524-5950 for details.
Clear the area under the door and the space along the tracks, and move cars out of the garage if you can. Take down anything stored near the ceiling around the opener, and note whether the door is stuck open, closed, or halfway, since that affects how the technician starts. If the door is stuck open, don’t force it; keep kids and pets clear of the doorway. Then call (844) 524-5950 and we’ll handle it.
Schedule Your Garage Door Repair Service in Arlington Today
A broken garage door is a same-day problem for most homeowners, and it doesn’t need to wait. Call Arlington Garage Door Repair Experts at (844) 524-5950 for a free, no-obligation estimate. We answer 24/7, dispatch from 7am to 7pm Sunday through Friday, and quote the price in writing before any work starts. Springs, openers, panels, tracks: one call covers it all. For a specialist look at your whole door, see Arlington Garage Door Repair Experts.
Written by the team at Arlington Garage Door Repair Experts.