Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Arlington?
Garage door repair in Arlington typically costs $150 – $600, depending on which part failed and how much of the system needs to come apart. A single broken spring is the most common call we get, and that job usually runs $180 – $340. Opener problems, bent panels and worn cables each land in their own range, so the fastest way to know where you sit is a free estimate before any work begins.
We’re Arlington Garage Door Repair Experts, and garage doors are all we do. That focus matters when a door fails, because the fix has to account for the door, the opener and the springs together rather than one piece at a time. Every price below is a typical estimate for the Arlington market in 2026, and the written estimate you get on site sets the final number.
Key Takeaways
- Most Arlington garage door repairs land between $150 and $600.
- Spring repair is $180 – $340 for one spring; a matched pair usually gets replaced together, so a pair costs about twice that.
- Opener repair runs $120 – $320, and a full opener installation runs $250 – $550.
- A whole new door is a different budget altogether: $700 – $2200.
- Estimates are free, and the price is set per job. Call (844) 524-5950. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Garage Door Repair Cost Breakdown (2026)
Here’s how the numbers break down by job type. These are typical estimated ranges for Arlington homes, not a menu. A door with a snapped torsion spring, a stripped gear in the opener and a bent bottom panel needs three different fixes, and the estimate spells out each one before anything is touched.
| Service | Typical Estimated Range | What It Covers |
|---|---|---|
| Garage door repair (general) | $150 – $600 | Diagnosis plus the most common single-part fixes |
| Spring repair (one spring) | $180 – $340 | Replacing a broken torsion or extension spring |
| Cable repair | $130 – $250 | Frayed, snapped or slipped lift cables |
| Opener repair | $120 – $320 | Motor, logic board, gear, travel and sensor fixes |
| Opener installation | $250 – $550 | New opener hung and dialed in on an existing door |
| Panel replacement | $250 – $500 | One or more damaged sections swapped out |
| Track realignment | $120 – $240 | Bent or knocked-out vertical and horizontal track |
| Roller replacement | $110 – $220 | Worn steel or nylon rollers, usually the full set |
| New door installation | $700 – $2200 | Full door and hardware on an existing opening |
Two things push a repair toward the top of its range. The first is how much has to come apart: replacing a single roller is quick, while a track realignment behind a jammed door means resetting the whole travel path. The second is parts. A common Clopay or Amarr panel is straightforward to source, and a Wayne Dalton or Raynor section can take longer depending on the model. We work on the brand you already have, and knowing the eight major manufacturers (LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor) means we diagnose the actual failure instead of guessing at the brand we’d rather sell.
Spring repair: one spring versus a pair
The $180 – $340 figure is the price for one spring. Most residential doors carry two, and when one breaks the other has usually lived the same life and is close behind it. That’s why a matched pair is usually replaced together, and a pair costs about twice the single-spring range. It’s rarely worth paying twice for the same visit, and a door running on one tired spring puts extra load on the opener and cables.
Springs are the one part of a garage door we tell homeowners never to handle. A wound torsion spring holds serious stored force, and the wrong tool or grip can release it in a way that causes real injury. This is trained-professional work, full stop. Our technicians have up to 10 years of experience with torsion and extension systems, and that’s the level of care this job needs.
What Affects Garage Door Repair Pricing in Arlington
Arlington isn’t a single kind of housing stock. A brick colonial in Ashton Heights, a townhouse near Clarendon, and a newer build out toward Ballston all present different doors, and that shapes the estimate as much as the broken part does.
- Door type and size. A single-car door takes less material and less time than a wide two-car door. Carriage-style and custom-width doors can push panel and installation costs upward because the sections aren’t standard.
- Which system failed. The door, the opener and the springs each carry their own price band. A dead opener is often the cheapest fix on the list; a spring failure costs more but is the more serious problem.
- Age of the hardware. Older openers and doors sometimes need a part that isn’t stocked everywhere, and a worn system can turn one repair into two once it’s opened up. A quick diagnosis up front keeps surprises to a minimum.
- Weather and seasonal wear. Arlington’s humid summers and freeze-thaw winters work on metal, lubrication and seals. Doors that sit through a wet spring and a cold snap tend to show worn rollers and stiff tracks sooner.
- Access and parking. Street parking around Clarendon and Ballston can be tight, and a door that opens onto a narrow alley takes a little more care to work on safely. It’s a small factor, but it’s real.
- Brand and part availability. A Genie or Chamberlain opener part is usually easy to source. An older Craftsman or a specific Raynor model may need a day to pull the right component, which affects scheduling more than price.
None of these factors is a mystery once a technician is standing in front of the door. That’s the point of the free estimate: the number you get is based on what’s actually wrong, not a phone guess.
How to Save on Garage Door Repair
The biggest lever on cost is catching a problem before it cascades. A door that’s been screeching for a month usually needs rollers; the same door ignored for a year can wear the track and burn out the opener along with it. Fixing the first thing is always cheaper than fixing three.
- Deal with the small stuff early. A roller replacement at $110 – $220 is a fraction of what a full track realignment plus opener repair can add up to if the wear is left alone.
- Replace springs as a pair. If one spring has failed, doing both in the same visit is usually the smarter spend than paying for two separate calls down the road.
- Repair before you replace when the door is sound. A door with good panels and a working opener rarely needs to be replaced just because a cable snapped.
- Keep the door lubricated and the tracks clean. A little routine care stretches the life of rollers, hinges and springs, and it costs nothing.
- Get the estimate in writing before work starts. A clear, itemized estimate is the best protection against a bill that grows mid-job.
Estimates are free, so there’s no reason to guess at the cost. Call (844) 524-5950 and we’ll get a technician out to look at the door. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Repair or Replace: Which Makes More Sense?
Repair almost always wins when the door structure is sound and one component has failed. A snapped spring, a tired opener or a bent track on an otherwise healthy door is a repair, and the numbers reflect that. Replacement starts to make sense when multiple panels are damaged, the door is badly out of balance, or the cost of piecemeal fixes starts climbing toward the $700 – $2200 installation range.
The honest answer comes from looking at the whole system. We check the door, the opener and the springs together, because a door that looks fine can be hiding a spring that’s about to go, and a new opener bolted onto a failing door won’t fix the problem. Fast diagnosis, right parts, lasting fix. That’s the standard we hold to on every call in Arlington.
Why a Specialist Handles This Better Than a Generalist
Garage doors have their own vocabulary of failure: torsion versus extension springs, cable drums, limits and travel on the opener, panel gauges, roller types. A handyman service spreads its attention across dozens of trades. A big-box installation crew knows the door it just sold you. Neither is set up to diagnose a Raynor door with a Chamberlain opener and a cable that’s slipped off its drum.
We do garage doors and nothing else, so every tool and every bit of training is aimed at one trade. Springs, openers, panels: one call covers it all. If the door won’t move, we find out why, whether the fault sits with the garage door repair work itself, the motor, or the spring system holding the weight. That single-call approach means you’re not bouncing between a door company, an opener company and a handyman while your car sits in the driveway.
What Happens When You Call
You describe what the door is doing, and we book a visit. A technician arrives, inspects the door, opener and springs, and gives you a written estimate before any work begins. If it’s a part we carry or can source quickly, the fix often happens the same visit. If it’s a spring or cable failure, that same trip usually resolves it, since those are exactly the jobs we’re set up for.
Call (844) 524-5950. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call that comes in outside dispatch hours gets booked into the next opening. The estimate is free, and the price you’re quoted is the price you pay.
FAQs – Garage Door Repair Cost
How much does garage door repair cost in Arlington?
Most garage door repairs in Arlington cost between $150 and $600, with the exact figure depending on the failed part. A roller swap sits near the bottom of that range and a multi-part spring and cable job sits near the top. Call (844) 524-5950 for an exact quote; estimates are free.
How much does it cost to replace a garage door spring in Arlington?
Spring repair runs $180 – $340 for one spring. Because most doors carry two springs that wear out together, a matched pair is usually replaced at once, and a pair costs about twice the single-spring range. Call (844) 524-5950 to get your door looked at; estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is cheaper in most cases, often by a wide margin. A spring, cable or opener fix lands in the $120 – $340 range, while a full new door installation runs $700 – $2200. Replacement only makes sense when the door itself is badly damaged or out of balance. Call (844) 524-5950 and we’ll tell you honestly which way your door is leaning.
How much does a new garage door opener cost in Arlington?
Opener repair costs $120 – $320, and a full opener installation runs $250 – $550. If the motor is dead or the logic board has failed, replacement is often the better value; if it’s a gear or sensor, repair usually wins. Call (844) 524-5950 for a free estimate on your specific opener.
Can you come today?
Same-day service is often possible when you call during dispatch hours, and many common repairs get handled on the first visit. Call (844) 524-5950. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and estimates are always free.
What brands do you work on?
We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor equipment. That covers most of what’s installed in Arlington homes, so a brand mismatch is rarely a problem. Call (844) 524-5950 if you’re unsure what you have; we’ll sort it out on the estimate.
Get a Free Estimate on Your Arlington Garage Door
Whatever the door is doing, the first step is a straight answer on what’s wrong and what it’ll cost to fix. We work on the brand you already have, we handle the door, the opener and the springs in one place, and the estimate is free. Your door is in specialist hands either way. Call (844) 524-5950. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Arlington market as of 2026. Arlington Garage Door Repair Experts offers free estimates – call (844) 524-5950.
What Our Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Tim Meyer"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Todd Sutton"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Matt Pruitt