Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Arlington Homeowners
A broken spring is the single most common reason a garage door stops working. When a torsion spring snaps, the door becomes dead weight you can’t safely lift, and the opener strains against a load it was never built to carry. We handle torsion and extension spring work every day, on the brands Arlington homes actually have: LiftMaster, Chamberlain, Genie and Clopay among them. Our technicians have up to 10 years of experience with these systems, so the diagnosis is quick and the fix holds. If your door won’t budge, call (844) 524-5950. We answer 24/7, fast dispatch runs 7am-7pm, and same-day service is often available in Arlington.
What Our Garage Door Spring Repair Service Includes
Springs absorb the weight of your door so the opener and you don’t have to. There are two systems, torsion and extension, and each one fails in its own way. Here’s what each part of our service covers.
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on a steel shaft above the door on most Arlington homes. When it snaps, you’ll usually hear a loud bang and find the door impossible to lift by hand. Torsion springs are wound under extreme tension, and adjusting or replacing one without the right winding bars and training can cause serious injury. Our technicians replace torsion springs on garage door spring repair calls using the correct winding procedure and a matched spring for your door’s weight, and they’ll explain what failed so you understand the fix.

Extension Spring Replacement
Extension springs run along the horizontal tracks on each side of the door, stretching as the door closes. When one breaks, it recoils toward the front of the garage, which is why safety cables matter. Older systems sometimes lose a spring and the door drops unevenly or jams at an angle. We replace extension springs in pairs and check that the door travels evenly afterward, because a mismatched spring will wear the opener and hinges faster.

Broken Spring Repair
A broken spring is usually obvious: the door won’t open, the opener hums without moving it, or you can see a gap in the coil. Sometimes a spring cracks rather than shatters, and the door still opens but feels heavier than normal. We test the spring and the door’s balance before replacing anything, so you’re not paying to replace a part that’s still good. If the door itself is also damaged, the same visit can cover it, since Arlington Garage Door Repair Experts handles the door, the opener and the springs under one roof.

Spring Adjustment
Springs loosen over time as the door cycles up and down, and the door gradually feels heavier or drifts down on its own. Adjustment restores the correct tension so the door balances in place halfway up. This is delicate work: over-winding a torsion spring is dangerous, and under-winding leaves the opener doing too much of the lifting. We check the door’s balance and set the tension to match it.
Safety Cable Installation
Safety cables run through the center of extension springs and contain them if one breaks. Many older spring systems in Arlington were installed before cables were common, or have cables that are rusted or frayed. Without a cable, a broken spring can fly across the garage with real force. We install cables as part of extension spring work and as a standalone safety check, and we’ll tell you plainly if yours are fine.
Spring Inspection
A spring inspection checks the coils for cracks, the cables for fraying, and the door’s balance and travel. Springs can weaken for years before they break, and a door that’s slow, noisy or heavy is often giving you warning. An inspection catches that early. If you’re not sure whether the problem is the spring, the opener or the track, we figure it out before quoting, so you know exactly what’s wrong.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work on the brands your door already has. LiftMaster openers are common in Arlington garages, and when one struggles to lift a door with a weak spring, the strain shows up in the opener’s gears and motor. We know how LiftMaster units behave under that load and can tell you whether the spring, the opener or both need attention. Chamberlain and Genie systems follow similar logic: the opener is often blamed for a problem that starts at the spring, so we test the door first.
On the door side, Clopay and Wayne Dalton make many of the doors we see on spring repair calls, and each brand has its own weight and spring configuration. We match the replacement spring to the door’s actual weight, not whatever happens to be on the shelf. Whether you have a Craftsman opener, an Amarr door, a Raynor system or anything else, the diagnostic approach is the same: find the real failure, use the right part, make the fix last. Whether you have LiftMaster or any other make, we can help.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. A torsion spring breaking sounds like a gunshot and often happens while the door is closed. If you heard it, don’t try to open the door by hand or with the opener. Call and we’ll get a technician out to confirm the cause and replace the spring safely.
- The door won’t lift, or the opener hums without moving it. This usually means the spring has failed and the opener can’t carry the door’s full weight. Keep running the opener and you risk burning out the motor or stripping its gears. Stop using it and book a spring repair.
- The door feels much heavier than usual when you lift it by hand. A door that used to lift easily but now takes real effort is telling you the springs have lost tension. This is a warning sign, not a normal change. Get it inspected before it fails completely.
- The door opens crooked or drifts down on its own. Uneven tension or a broken spring on one side will pull the door off balance. That puts stress on the tracks, rollers and opener. A spring adjustment or replacement usually settles it.
- Visible gaps, cracks or rust on the springs. A crack in a coil or heavy rust means the spring is near the end of its life. It can still be working now and fail soon. Replacing it on your schedule beats an emergency call later.
Our Garage Door Spring Repair Process – Step by Step
- 1
Phone diagnosis and scheduling. When you call, we ask what the door is doing so we can arrive with the right springs and tools. If it’s a broken spring, we usually know before we get there. We schedule the visit, and same-day service is common in Arlington.
- 2
On-site inspection and safety check. The technician tests the door’s balance, checks the springs, cables, rollers and tracks, and confirms what failed. We never start winding a spring without knowing the door’s weight and the state of everything attached to it.
- 3
Written estimate before any work. You get a clear price for the repair before we touch a tool, and the price is quoted and agreed before work starts. The written estimate sets the final price, so there are no surprises after the fact.
- 4
Spring replacement and adjustment. We install the correct spring for your door, wind it to the right tension, and test the door’s balance at the halfway point. We check that the opener isn’t fighting the door and adjust as needed.
- 5
Full cycle test and walkthrough. Before we leave, we cycle the door several times and confirm it opens smoothly and closes evenly. We show you what we replaced and flag anything that might need attention later.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Arlington?
Garage door spring repair in Arlington typically runs $180 – $340 for one spring. Most doors are built with a matched pair, and since both springs wear at the same rate, they’re usually replaced together: a pair runs about twice that range. The exact price depends on the spring type, the door’s weight and how much adjacent hardware needs attention.
| Service | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Matched pair (both springs) | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Garage door repair (general) | $150 – $600 |
What moves the number: the spring type (extension springs generally cost less than torsion), whether both springs are replaced, and whether cables or rollers need replacing at the same time. A door that’s been run on a broken spring for a while can also have opener damage, which we’ll flag before quoting.
To avoid overpaying, ask for a written estimate before work starts and confirm whether the price covers one spring or both. Our estimates are free, and the quote is agreed before any work begins. For a related issue, see our garage door spring repair page for Fort Hunt.
Garage Door Spring Repair Near Arlington – Our Service Area
We handle spring repair across Arlington and the surrounding communities, including garage door spring repair in Mount Vernon, plus Fort Hunt, Mason Neck, Seven Corners, Bailey’s Crossroads, Lake Barcroft, Falls Church, Alexandria and West Falls Church. Response is fast: call and we’ll give you the earliest arrival window. Our phones are answered 24/7 and dispatch runs 7am-7pm, Sunday through Friday. We’re closed Saturday.
Serving Arlington, VA – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Arlington
Garage door spring repair is the replacement or adjustment of the torsion or extension springs that counterbalance your door’s weight. When a spring breaks or weakens, the door becomes too heavy for the opener and can’t operate safely. Our technicians diagnose whether the spring, cables or opener is the cause before doing any work.
Most spring replacements take about one to two hours on site, including the balance test. A pair takes a little longer than a single spring, and cables or hardware add time. The technician will give you a realistic time estimate when quoting.
Spring repair in Arlington typically runs $180 – $340 for one spring, and a matched pair costs about twice that. The written estimate sets the final price, and it’s agreed before any work starts. Call (844) 524-5950 for an exact quote, since estimates are free.
Yes. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor equipment. We know where each brand tends to wear and can tell whether the spring, the opener or both need attention. If you have a different make, call and we’ll confirm.
Same-day service is often available in Arlington for broken springs. We answer 24/7, and dispatch runs 7am-7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We stand behind our work, and the warranty terms are explained in your written estimate before work starts. Ask the technician what’s covered and for how long. That way you know exactly what you’re getting.
Clear the area under and around the door so the technician has room to work, and don’t try to lift the door yourself. If the door is open, leave it and don’t run the opener. Have your door’s make and model handy if you know it, which helps us bring the right spring.
Schedule Your Garage Door Spring Repair Service in Arlington Today
If your door won’t lift or you heard a spring snap, don’t wait. Call (844) 524-5950. We answer 24/7, fast dispatch runs 7am-7pm, and same-day spring repair is often available in Arlington. You’ll get a free, no-obligation estimate with a price agreed before any work starts. Springs, openers and doors: one call covers it all.
Written by the team at Arlington Garage Door Repair Experts.